This Royal Oak 15451ST replica is a 37 mm steel model with CZ stones set by hand around the bezel. The silver-white Grande Tapisserie dial has applied markers and a date at 3 o’clock, and the case sits on an integrated 316L steel bracelet with a folding clasp.
Royal Oak 15451ST specifications
| Reference | 15451ST.ZZ.D011CR.01 |
| Case | 37 mm, 316L stainless steel, brushed and polished |
| Dial | Silver-white Grande Tapisserie, applied markers, date at 3 o’clock |
| Movement | Automatic, 40-48 hours power reserve, about ±10 seconds a day |
| Crystal | Anti-reflective sapphire, front and caseback |
| Bracelet | Integrated 316L steel bracelet, as shown in the photos |
| Clasp | Folding clasp |
| Water | Splash-resistant: rain and hand washing are fine; take it off before a pool, bath or shower |
| Stones | CZ, hand-set around the bezel |
A stone-set 37 mm Royal Oak
The stones cover the bezel surface while the eight screws stay in place, so the octagon still reads clearly. On the original, ZZ in the reference marks a gem-set version. Through the sapphire caseback you can see the automatic movement.
Bracelet and sizing
Each bracelet link alternates brushed and polished surfaces, and the bracelet closes with a folding clasp. Most wrists need two to four links removed, which any watchmaker can do. Plain-bezel and larger models are in the Royal Oak category. The same CZ bezel in a 33 mm case is among our Iced Out watches.























